Institut für Konstruktionswissenschaften und Technische Logistik
> Zum Inhalt

Publikationen

Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Maschinenwesen und Betriebswissenschaften erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite Publikationen der Fakultät direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der TU Wien.

To top

Im Druck erschienene Originalbeiträge
58 Datensätze:

Zeitschriftenartikel

L. Rinder, M. Grafinger:
"Die einheitliche analytische Darstellung allgemeiner Rotorverzahnungen für Schraubenmaschinen";
KI Luft- und Kältetechnik, 10 (2002), 10.

M. Grafinger:
"OneSpace Designer versus CATIA, Ein Softwarevergleich im Rahmen der CAD-Ausbildung im Maschinenbau.";
ZIDline, Informationen des zentralen Informatikdienstes der TU Wien, 11 (2004), S. 35 - 38.

L. Rinder, M. Grafinger:
"Lagerung von Schraubenverdichterrotoren mit nur einem einseitigen Kegelrollenlager auf der Druckseite";
Schraubenmaschinen, 9 (2001), S. 87 - 92.

M. Grafinger:
"Verformungen und Belastungen von Bowdenzughüllen: Einfluss verschiedener Einspannbedingungen auf Kräfte und Momente.";
Konstruktion, 10 (2001), S. 67 - 71.

M. Grafinger:
"Finite-Elemente-Berechnungsprogramm für Bowdenzüge: Beschreibung und Umsetzung.";
Konstruktion, 9 (2001), S. 64 - 69.

L. Rinder, M. Grafinger:
"Verzahnungsgeometrie und möglicher Vorzeichenwechsel beim Drehmoment und Achsschub am Nebenrotor von Schraubenkompressoren";
Schraubenmaschinen, 7 (1999), S. 49 - 60.

M Abramovici, D. Gerhard:
"Engineering Daten Management (EDM) - Anspruch, Wirklichkeit und Zukunftsperspektiven";
Industriemanagement, 5 (1996).

M Abramovici, D. Gerhard, L. Langenberg:
"Werkzeuge, Methoden und Standards für die Unterstützung verteilter Entwicklungsprozesse durch EDM/PDM";
Industriemanagement, 3 (1998), S. 20 - 23.

D. Gerhard:
"Einrichtung eines Rechnerlabors für Virtuelle Produktentwicklung";
ZIDline, Informationen des zentralen Informatikdienstes der TU Wien, 1 (2006), 15; S. 30 - 33.

D. Gerhard, C. Lutz:
"Rechnerunterstütztes Konfigurieren und Auslegen kundenindividueller Produkte";
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 3 (2011), S. 103 - 104.

D. Gerhard, G. Reinauer, A. Krumböck, R. Ljuhar:
"Information management in product development workflows - a novel approach on the basis of pseudonymization of product information";
Procedia CIRP, 21 (2014), ISSN: 2212-8271; S. 467 - 472.

Buchbeiträge

D. Gerhard:
"The Role of Semantic Technologies in Future PLM";
in: "Integration of Practice-Oriented Knowledge Technology: Trends and Prospectives", M. Fathi (Hrg.); Springer-Verlag, Berlin Heidelberg, 2012, ISBN: 978-3-642-34470-1, S. 157 - 170.

D. Gerhard, A. Denger, M. Kaiser:
"Implications of Open Innovation Approaches on Future PLM";
in: "Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013", M Abramovici, R. Stark (Hrg.); Springer-Verlag, Berlin Heidelberg, 2013, ISBN: 978-3-642-30816-1, S. 71 - 81.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"Forecasting Environmental Profiles in the Early Stages of Product Development by Using an Ontological Approach";
in: "Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013", M Abramovici, R. Stark (Hrg.); Springer-Verlag, Berlin Heidelberg, 2013, ISBN: 978-3-642-30816-1, S. 715 - 724.

Beiträge in Tagungsbänden

L. Rinder, M. Grafinger:
"Entwicklung, Beurteilung und Optimierung von Rotorprofilen mit der Profilsteigungsfunktion";
in: "VDI-Berichte Schraubenmaschinen", Springer-Verlag, 2002.

M Abramovici, D. Gerhard, L. Langenberg:
"Application of PDM technology for Product Life Cycle Management";
Vortrag: 4th CIRP International Seminar of Life Cycle Engineering, Berlin; 1997-06-26 - 1997-06-27; in: "Life Cycle Networks", (1997), S. 17 - 31.

M Abramovici, D. Gerhard:
"Use of PDM in Improving Design Processes - Stateof the Art, Potentials and User Perspectives";
Vortrag: 11th international Conference on Engineering Design ICED, Tampere; 1997-08-19 - 1997-08-21; in: "Schriftenreihe WDK 25", Volume 3 (1997), S. 317 - 322.

M Abramovici, D. Gerhard:
"Flexible Management of Distributed Engineering Information Resources with PDM";
Vortrag: 12th international Conference on Engineering Design ICED, München; 1999-08-24 - 1999-08-26; in: "Flexible Management of Distributed Engineering Information Resources with PDM", WDK 26, Volume 3 (1999), S. 1425 - 1430.

M Abramovici, D. Gerhard, L. Langenberg:
"Supporting Distributed Product Development Processes with PDM";
Vortrag: CIRP Seminar STC Design, Berlin; 1998-05-14 - 1998-05-15; in: "New Tools and Workflows for Product Development", Fraunhofer, (1998).

M Abramovici, D. Gerhard, L. Langenberg:
"Application of Product Data Management Technology for Enterprise-Wide Distributed Produ";
Vortrag: 10th International IFIP WG 5.2/5.3 Conference PROLAMAT 98, Trento; 1998-09-09 - 1998-09-12; in: "Globalization of Manufacturing in the Digital Communications Era 21st Century", (1998).

M Abramovici, D. Gerhard, L. Langenberg:
"Unterstützung verteilter Entwicklungsprozesse durch EDM/PDM";
Vortrag: VDI-EKV Tagung München 98, München; 1998-10-20 - 1998-10-21; in: "Informationsverarbeitung in der Konstruktion 98", VDI-Verlag, 1435 (1998), S. 69 - 86.

N Bojanic, M. Gföhler, MG Pandy, M. Grafinger, C. Kronnerwetter:
"MR-based Lower-limb Musculoskeletal Model of a Child";
Vortrag: 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, CMBBE2006, Antibes, France (eingeladen); 2006-03-22 - 2006-03-25; in: "Computer Methods in Biomechanics and Biomedical Engineering", J. Middleton, N.G. Shrive (Hrg.); First Numerics Ltd., (2006), ISBN: 0-9549670-2-x; Paper-Nr. 240 MAS, 6 S.

D. Freisleben, B. Wenge, D. Gerhard:
"Einführung eines EDM/PDM-Systems in einem Unternehmen des öffentlichen Personennahverkehrs (ÖPNV)";
Vortrag: VDI-EKV Tagung München 99, München; 1999-10-19 - 1999-10-20; in: "Informationsverarbeitung in der Konstruktion 99", VDI-Verlag, 1497 (1999), S. 187 - 206.

M Abramovici, D. Gerhard:
"A Flexible Web-Based PDM Approach to Support Virtual Engineering Cooperation";
Vortrag: IEEE Computer Society 2000, Hawaii; 2000; in: "Proceedings of the 33 Annual Hawaii International Conference on System Sciences HICSS", (2000).

D. Gerhard:
"Erfolgsstrategien für effiziente IT-Unterstützung im Sondermaschinen- und Anlagenbau aus Sicht eines KMU";
Vortrag: Digital Engineering Forum 2004, Bochum; 2004; in: "Festschrift 10 Jahre Lehrstuhl Maschinenbauinformatik der Ruhr-Universität Bochum", (2004).

D. Gerhard:
"Using a Product Data Management System as Basis for Multi-disciplinary Education in Engineering Design";
Vortrag: ConnectED 2007 International Conference on Design Education, Sydney, Australien; 2007-07-09 - 2007-07-12; in: "Proceedings of ConnectED 2007 International Conference on Design Education", (2007), Paper-Nr. 231, 4 S.

Z. Ahmed, D. Gerhard:
"An Agent based Approach towards Metadata Extraction, Modelling and Information Retrieval over the Web";
Poster: 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-12 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 S.

Z. Ahmed, D. Gerhard:
"Role of Ontology in Semantic Web Development";
Poster: First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-11 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 S.

Z. Ahmed, D. Gerhard:
"Designing a Dynamic Components and Agent based Approach for Semantic Information Retrieval";
in: "6th CIIT Workshop on Research in Computing (CWRC Fall 2007) COMSATS Institute of Information Technology", COMSATS Institute of Information Technology, Abbottabad PAKISTAN, 2007.

Z. Ahmed, D. Gerhard:
"How does Ontology Contribute in Semantic Web Development ?";
in: "6th CIIT Workshop on Research in Computing (CWRC Fall 2007) COMSATS Institute of Information Technology", COMSATS Institute of Information Technology, Abbottabad PAKISTAN, 2007.

Z. Ahmed, D. Gerhard:
"Personal Assistant towards Semantic Information Retrieval";
Poster: 13th International Conference on Artificial Intelligence in Education (AIED 2007), Los Angeles USA; 2007-07-09 - 2007-07-13; in: "Fifth International Workshop on Ontologies and Semantic Web for E-Learning (SWEL'07)", (2007), 2 S.

Z. Ahmed, D. Gerhard:
"Web to Semantic Web & Role of Ontology";
in: "National Conference on Information and Communication Technologies (NCICT 2007),", National Conference on Information and Communication Technologies (NCICT 2007), Bannu PAKISTAN, 2007.

Z. Ahmed, D. Gerhard:
"Contributions of PDM Systems in Organizational Technical Data Management";
in: "The First IEEE International Conference On Computer, Control & Communication (IEEE-IC4 2007), Organized by Pakistan Navel Engineering College (PNEC), Karachi, in collaboration with IEEE and Higher Education Commission (HEC), Pakistan", The First International Conference On Computer, Control & Communication, Karachi, PAKISTAN, 2007, S. 26 - 30.

M. Grafinger, G. Woitsch:
"EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
Vortrag: SIMPEP 2009, Veitshöchheim bei Würzburg (eingeladen); 2009-06-18 - 2009-06-19; in: "Kongress zur Simulation im Produktentstehungsprozess", (2009), S. 521 - 530.

M. Grafinger, G. Woitsch, M. Weigand, D. Gerhard:
"EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
Vortrag: SIMPEP - Kongress zur Simulation im Produktentstehungsprozess, Würzburg; 2009-06-18 - 2009-06-19; in: "SIMPEP - Kongress zur Simulation im Produktentstehungsprozess", FVA - Forschungsvereinigung Antriebstechnik, Frankfurt am Main, Frankfurt am Main (2009), S. 521 - 552.

Z. Ahmed, D. Gerhard:
"Design Implementation of I-SOAS IPM for Advanced Product Data Management";
in: "Second IEEE International Conference On Computer, Control & Communication (IEEE-IC4 2009), Organized by Pakistan Navel Engineering College (PNEC), In collaboration with IEEE and Higher Education Commission (HEC)", herausgegeben von: IEEE-IC4; IEEE, KARACHI, Pakistan, 2009, ISBN: 978-1-4244-3314-8, S. 18 - 23.

Z. Ahmed, D. Gerhard:
"Design Implementation of Semantic Oriented Agent and Knowledge based approach for Intelligent Human Machine Data Manipulation";
in: "4th Virtual International Conference on Innovative Production Machines and Systems (IPROMS 2008), Manufacturing Engineering Centre Cardiff University", herausgegeben von: IPROMS; IPROMS 2008, Cardiff, UK, 2008.

Z. Ahmed, D. Gerhard:
"Semantic Oriented Agent based Approach towards Engineering Data Management, Web Information Retrieval and User System Communication Problems";
in: "3rd International Conference for Internet Technology and Secured Transactions, Dublin Institute of Technology", ICITST, Dublin, IRELAND, 2008, ISBN: 0-9546628-2-2.

L. Weilguny, D. Gerhard:
"Applied Feature Technology - Review of Developing a generic Solution facilitating Data-Consistency and enabling Knowledge-based Engineering";
in: "CIRP Design Conference 2008: Design Synthesis", herausgegeben von: CIRP; CIRP 2008, 2008, ISBN: 978-90-365-2634-0, 6 S.

L. Weilguny, D. Gerhard:
"Feature Technology For The Automotive Industry- A Knowledge Based Engineering Solution On The Basis Of Userdefined Festures In Pro/Engineer";
in: "Nantes, France 22-24 October 2008", Proceedings of DET2008 5th International Conference on Digital Enterprise Technology, 2008, ISBN: 9782748345988, 8 S.

D. Gerhard, L. Weilguny:
"Implementation of a Knowledge-Based Engineering Concept using Feature Technolog at an Automotive OEM";
Vortrag: 17th International Conference on Engineering Design ICED09, Stanford, California, USA; 2009-08-24 - 2009-08-27; in: "Proceedings of the 17th International Conference on Engineering Design (ICED'09), Vol. 7", (2009), ISBN: 9-781904-670117; Paper-Nr. 7-69, 12 S.

D. Gerhard, L. Weilguny:
"Review on the Implementation of a KBE Concept using Feature Technology at an automotive OEM";
Vortrag: 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), Munich, Germany; 2009-10-05 - 2009-10-07; in: "3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production", (2009), 10 S.

D. Gerhard, M. Grafinger:
"Integrative Engineering Design Using Product Data Management Systems In Education";
Vortrag: 11th International Conference on Engineering and Product Design Education, Brighton; 2009-09-10 - 2009-09-11; in: "11th International Conference on Engineering and Product Design Education", (2009), 6 S.

M. Grafinger:
"Entwurf und Berechnung von Rotorprofilen mit der Profilsteigungsfunktion und dem Computerprogramm SV_Win";
Vortrag: VDI Tagung, TU Dortmund (eingeladen); 2010-10-05 - 2010-10-06; in: "Schraubenmaschinen 2010", VDI Wissensforum GmbH (Hrg.); VDI-Berichte, 2101 (2010), ISBN: 978-3-18-092101-3; S. 357 - 372.

D. Gerhard, C. Lutz:
"Implementation of practice-orientated IT-Systems for knowledge based configuration and design of customised products.";
in: "Proceedings of The 43th CIRP International Conference on Manufacturing Systems - CIRP ICMS 2010", herausgegeben von: Cirp Icms 2010; Neuer wissenschaftlicher Verlag, Wien, 2010, ISBN: 978-3-7083-0686-5, S. 1060 - 1069.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"Integrating LCA into PDM for Ecodesign";
Vortrag: International Conference on Information and Knowledge Engineering (ICIKE 11), Singapore; 2011-09-28 - 2011-09-30; in: "World Academy of Science, Engineering and Technology", World Academy of Science, Engineering and Technology, Year 7, Issue 81, September 2011 (2011), ISSN: 2010-376x; S. 223 - 228.

Z. Ahmed, D. Gerhard:
"Information Engineering and Knowledge Management based approach towards Intelligent E-Learning Systems Development";
in: "4th Virtual International Conference on Innovative Production Machines and Systems (IPROMS), by European Commission", herausgegeben von: IPROMS; IPROMS 2008, Cardiff UK, 2008, ISBN: 978-1904445-81-4, Paper-Nr. 69, 3 S.

C. Lutz, D. Gerhard:
"IT-Based Configuration and Dimensioning of Customer Specific Products";
in: "Proceedings of the 18th International Conference on Engineering Design (ICED11), Vol. 6", T. Howard, W. Chen, T. McAloone, B. Hicks, S. Culley (Hrg.); herausgegeben von: Design Society; Design Society, 2011, ISBN: 978-1-904670-26-1, S. 192 - 199.

W. Sihn, F. Bleicher, D. Gerhard:
"Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology";
Vortrag: 2nd Conference on Learning Factories, Wien; 2012-05-10; in: "Competitive production in Europe through education and training", W. Sihn, A. Jäger (Hrg.); (2012), S. 160 - 177.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"Implementing PDM Systems in Design Education to Enhance Design Collaboration";
Vortrag: 14th INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION E&PDE 2012, Antwerpen; 2012-09-06 - 2012-09-07; in: "Proceedings of E&PDE 2012", (2012), Paper-Nr. 5153, 7 S.

D. Gerhard, T. Rahmani:
"PDM based Lifecycle Analysis - A Case Study";
Vortrag: Entwerfen - Entwickeln - Erleben EEE2012, Dresden; 2012-06-14; in: "Entwerfen Entwickeln Erleben: Methoden und Werkzeuge in der Produktentwicklung", TUDpress, (2012), ISBN: 978-3-942710-80-0; Paper-Nr. 205, 7 S.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"An Ontological Approach for the Integration of Life Cycle Assessment into Product Data Management Systems";
Vortrag: 22nd CIRP Design Conference (CIRP Design 2012), Bangalore; 2012-03-28 - 2012-03-30; in: "Proceedings of the 22nd CIRP Design Conference (CIRP Design 2012)", A. Chakrabarti (Hrg.); Springer, (2012), ISBN: 978-1-4471-4506-6; S. 249 - 256.

D. Gerhard:
"Semantic Technologies in PLM - Vision, Requirements, Approaches";
Hauptvortrag: 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung, Piracicaba (eingeladen); 2012-10-01 - 2012-10-05; in: "Tagungsband 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung", (2012), 11 S.

D. Gerhard, T. Rahmani, S. Bougain:
"Ontology-based integration of heterogeneous material data resources in Product Lifecycle Management";
in: "Proceedings of 2013 IEEE International Conference on Systems, Man, and Cybernetics", IEEE Computer Society Press, 2013, ISBN: 978-1-4799-0652-9, S. 4589 - 4594.

D. Gerhard, S. Ugurlu:
"Integrative Product Creation - Results from a New Course in a Learning Factory";
Vortrag: E&PDE 2014 16th International conference on Engineering and Product Design, University of Twente, The Netherlands, Enschede; 2014-09-04 - 2014-09-05; in: "16th International Conference on Engineering and Product Design Education", Design Society, DS 78 (2014), ISBN: 978-1-904670-56-8; S. 543 - 548.

D. Gerhard, S. Bougain, C. Nigischer, S. Ugurlu et al.:
"Integrating Energy Demand of Manufacturing Resources in Production Planning";
in: "2014 International Conference on Production Research - Africa, Europe and Middle East", herausgegeben von: TU Cluj-Napoca; TU Cluj-Napoca, TU Cluj-Napoca, 2014, Paper-Nr. 17, 5 S.

D. Gerhard, S. Bougain, C. Nigischer, S. Ugurlu:
"Towards energy management in production planning software based on energy consumption as a planning resource";
in: "12th Global Conference on Sustainable Manufacturing", 26; herausgegeben von: Procedia CIRP 26 ( 2015 ); Procedia CIRP 26 ( 2015 ), Procedia CIRP 26 ( 2015 ), 2015, 6 S.

R. Pamminger, A. Diaz, W. Wimmer, M. Hennig:
"ECODESIGN+ A webbased tool for assessing the carbon footprint of products";
Poster: Going Green Care Innovation, Wien; 2014-11-17 - 2014-11-20; in: "Going Green Care Innovation - Proceedings", B. Kopacek (Hrg.); SAT, (2014), 1 S.


Vorträge und Posterpräsentationen

37 Datensätze:

M Abramovici, D. Gerhard, L. Langenberg:
"Application of PDM technology for Product Life Cycle Management";
Vortrag: 4th CIRP International Seminar of Life Cycle Engineering, Berlin; 1997-06-26 - 1997-06-27; in: "Life Cycle Networks", (1997), S. 17 - 31.

M Abramovici, D. Gerhard:
"Use of PDM in Improving Design Processes - Stateof the Art, Potentials and User Perspectives";
Vortrag: 11th international Conference on Engineering Design ICED, Tampere; 1997-08-19 - 1997-08-21; in: "Schriftenreihe WDK 25", Volume 3 (1997), S. 317 - 322.

M Abramovici, D. Gerhard:
"Flexible Management of Distributed Engineering Information Resources with PDM";
Vortrag: 12th international Conference on Engineering Design ICED, München; 1999-08-24 - 1999-08-26; in: "Flexible Management of Distributed Engineering Information Resources with PDM", WDK 26, Volume 3 (1999), S. 1425 - 1430.

M Abramovici, D. Gerhard, L. Langenberg:
"Supporting Distributed Product Development Processes with PDM";
Vortrag: CIRP Seminar STC Design, Berlin; 1998-05-14 - 1998-05-15; in: "New Tools and Workflows for Product Development", Fraunhofer, (1998).

M Abramovici, D. Gerhard, L. Langenberg:
"Application of Product Data Management Technology for Enterprise-Wide Distributed Produ";
Vortrag: 10th International IFIP WG 5.2/5.3 Conference PROLAMAT 98, Trento; 1998-09-09 - 1998-09-12; in: "Globalization of Manufacturing in the Digital Communications Era 21st Century", (1998).

M Abramovici, D. Gerhard, L. Langenberg:
"Unterstützung verteilter Entwicklungsprozesse durch EDM/PDM";
Vortrag: VDI-EKV Tagung München 98, München; 1998-10-20 - 1998-10-21; in: "Informationsverarbeitung in der Konstruktion 98", VDI-Verlag, 1435 (1998), S. 69 - 86.

N Bojanic, M. Gföhler, MG Pandy, M. Grafinger, C. Kronnerwetter:
"MR-based Lower-limb Musculoskeletal Model of a Child";
Vortrag: 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, CMBBE2006, Antibes, France (eingeladen); 2006-03-22 - 2006-03-25; in: "Computer Methods in Biomechanics and Biomedical Engineering", J. Middleton, N.G. Shrive (Hrg.); First Numerics Ltd., (2006), ISBN: 0-9549670-2-x; Paper-Nr. 240 MAS, 6 S.

D. Freisleben, B. Wenge, D. Gerhard:
"Einführung eines EDM/PDM-Systems in einem Unternehmen des öffentlichen Personennahverkehrs (ÖPNV)";
Vortrag: VDI-EKV Tagung München 99, München; 1999-10-19 - 1999-10-20; in: "Informationsverarbeitung in der Konstruktion 99", VDI-Verlag, 1497 (1999), S. 187 - 206.

M Abramovici, D. Gerhard:
"A Flexible Web-Based PDM Approach to Support Virtual Engineering Cooperation";
Vortrag: IEEE Computer Society 2000, Hawaii; 2000; in: "Proceedings of the 33 Annual Hawaii International Conference on System Sciences HICSS", (2000).

D. Gerhard:
"Erfolgsstrategien für effiziente IT-Unterstützung im Sondermaschinen- und Anlagenbau aus Sicht eines KMU";
Vortrag: Digital Engineering Forum 2004, Bochum; 2004; in: "Festschrift 10 Jahre Lehrstuhl Maschinenbauinformatik der Ruhr-Universität Bochum", (2004).

D. Gerhard:
"PLM - ein Managementansatz für die Industrie";
Hauptvortrag: CSC PLM Expertengespräch, Wien (eingeladen); 2007-03-31.

D. Gerhard:
"Using a Product Data Management System as Basis for Multi-disciplinary Education in Engineering Design";
Vortrag: ConnectED 2007 International Conference on Design Education, Sydney, Australien; 2007-07-09 - 2007-07-12; in: "Proceedings of ConnectED 2007 International Conference on Design Education", (2007), Paper-Nr. 231, 4 S.

D. Gerhard:
"Die Bedeutung der Wissensplattform PDM aus universitärer Sicht";
Hauptvortrag: PTC Anwender- & Innovationsforum, Steyregg, Schloss (eingeladen); 2007-06-14.

Z. Ahmed, D. Gerhard:
"An Agent based Approach towards Metadata Extraction, Modelling and Information Retrieval over the Web";
Poster: 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-12 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 S.

Z. Ahmed, D. Gerhard:
"Role of Ontology in Semantic Web Development";
Poster: First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-11 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 S.

Z. Ahmed, D. Gerhard:
"Personal Assistant towards Semantic Information Retrieval";
Poster: 13th International Conference on Artificial Intelligence in Education (AIED 2007), Los Angeles USA; 2007-07-09 - 2007-07-13; in: "Fifth International Workshop on Ontologies and Semantic Web for E-Learning (SWEL'07)", (2007), 2 S.

M. Grafinger:
"CATIA FEM Effiziente Simulationen im Produktentwicklungsprozess";
Vortrag: PLM Forum 2008, Steyregg, Linz (eingeladen); 2008-09-24 - 2008-09-25.

M. Grafinger:
"PLM-Produkte an der TU-Wien";
Vortrag: IBM PLM-Forum 2006, Wien (eingeladen); 2006-09-07.

M. Grafinger, G. Woitsch:
"EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
Vortrag: SIMPEP 2009, Veitshöchheim bei Würzburg (eingeladen); 2009-06-18 - 2009-06-19; in: "Kongress zur Simulation im Produktentstehungsprozess", (2009), S. 521 - 530.

M. Grafinger, G. Woitsch, M. Weigand, D. Gerhard:
"EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
Vortrag: SIMPEP - Kongress zur Simulation im Produktentstehungsprozess, Würzburg; 2009-06-18 - 2009-06-19; in: "SIMPEP - Kongress zur Simulation im Produktentstehungsprozess", FVA - Forschungsvereinigung Antriebstechnik, Frankfurt am Main, Frankfurt am Main (2009), S. 521 - 552.

D. Gerhard, L. Weilguny:
"Implementation of a Knowledge-Based Engineering Concept using Feature Technolog at an Automotive OEM";
Vortrag: 17th International Conference on Engineering Design ICED09, Stanford, California, USA; 2009-08-24 - 2009-08-27; in: "Proceedings of the 17th International Conference on Engineering Design (ICED'09), Vol. 7", (2009), ISBN: 9-781904-670117; Paper-Nr. 7-69, 12 S.

D. Gerhard, L. Weilguny:
"Review on the Implementation of a KBE Concept using Feature Technology at an automotive OEM";
Vortrag: 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), Munich, Germany; 2009-10-05 - 2009-10-07; in: "3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production", (2009), 10 S.

D. Gerhard, M. Grafinger:
"Integrative Engineering Design Using Product Data Management Systems In Education";
Vortrag: 11th International Conference on Engineering and Product Design Education, Brighton; 2009-09-10 - 2009-09-11; in: "11th International Conference on Engineering and Product Design Education", (2009), 6 S.

D. Gerhard:
"Semantic Web Technologien und Produktdatenmanagement";
Vortrag: Contact Automotive Symposium, München (eingeladen); 2008-11-20.

D. Gerhard:
"Auf dem Weg zur praxisorientierten Kompetenz: Cross-Teaching TU-HTL und interfakultäre Kooperation";
Vortrag: TU Wien E-Learning Tag 2008: E-Learning abseits des Mainstreams, Wien; 2008-11-20.

M. Grafinger:
"Entwurf und Berechnung von Rotorprofilen mit der Profilsteigungsfunktion und dem Computerprogramm SV_Win";
Vortrag: VDI Tagung, TU Dortmund (eingeladen); 2010-10-05 - 2010-10-06; in: "Schraubenmaschinen 2010", VDI Wissensforum GmbH (Hrg.); VDI-Berichte, 2101 (2010), ISBN: 978-3-18-092101-3; S. 357 - 372.

M. Grafinger:
"Nichtlineare Finite Elemente Simulation mit dem neuen CATIA V5 ANL - Modul";
Vortrag: PLM Forum 2010, Mannheim (eingeladen); 2010-06-16 - 2010-06-17.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"Integrating LCA into PDM for Ecodesign";
Vortrag: International Conference on Information and Knowledge Engineering (ICIKE 11), Singapore; 2011-09-28 - 2011-09-30; in: "World Academy of Science, Engineering and Technology", World Academy of Science, Engineering and Technology, Year 7, Issue 81, September 2011 (2011), ISSN: 2010-376x; S. 223 - 228.

D. Gerhard:
"PLM Impulsreferat Integrated Architecture";
Vortrag: CSC PLM Expertengespräch, Linz (eingeladen); 2011-10-20.

W. Sihn, F. Bleicher, D. Gerhard:
"Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology";
Vortrag: 2nd Conference on Learning Factories, Wien; 2012-05-10; in: "Competitive production in Europe through education and training", W. Sihn, A. Jäger (Hrg.); (2012), S. 160 - 177.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"Implementing PDM Systems in Design Education to Enhance Design Collaboration";
Vortrag: 14th INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION E&PDE 2012, Antwerpen; 2012-09-06 - 2012-09-07; in: "Proceedings of E&PDE 2012", (2012), Paper-Nr. 5153, 7 S.

D. Gerhard, T. Rahmani:
"PDM based Lifecycle Analysis - A Case Study";
Vortrag: Entwerfen - Entwickeln - Erleben EEE2012, Dresden; 2012-06-14; in: "Entwerfen Entwickeln Erleben: Methoden und Werkzeuge in der Produktentwicklung", TUDpress, (2012), ISBN: 978-3-942710-80-0; Paper-Nr. 205, 7 S.

H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
"An Ontological Approach for the Integration of Life Cycle Assessment into Product Data Management Systems";
Vortrag: 22nd CIRP Design Conference (CIRP Design 2012), Bangalore; 2012-03-28 - 2012-03-30; in: "Proceedings of the 22nd CIRP Design Conference (CIRP Design 2012)", A. Chakrabarti (Hrg.); Springer, (2012), ISBN: 978-1-4471-4506-6; S. 249 - 256.

D. Gerhard:
"Semantic Technologies in PLM - Vision, Requirements, Approaches";
Hauptvortrag: 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung, Piracicaba (eingeladen); 2012-10-01 - 2012-10-05; in: "Tagungsband 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung", (2012), 11 S.

D. Gerhard, T. Rahmani:
"Konzept zur Wissensrepräsentation von Produktstrukturen mit Hilfe von Ontologien";
Vortrag: DFX-Symposium 2012, Bamberg; 2012-10-04 - 2012-10-05.

D. Gerhard, S. Ugurlu:
"Integrative Product Creation - Results from a New Course in a Learning Factory";
Vortrag: E&PDE 2014 16th International conference on Engineering and Product Design, University of Twente, The Netherlands, Enschede; 2014-09-04 - 2014-09-05; in: "16th International Conference on Engineering and Product Design Education", Design Society, DS 78 (2014), ISBN: 978-1-904670-56-8; S. 543 - 548.

R. Pamminger, A. Diaz, W. Wimmer, M. Hennig:
"ECODESIGN+ A webbased tool for assessing the carbon footprint of products";
Poster: Going Green Care Innovation, Wien; 2014-11-17 - 2014-11-20; in: "Going Green Care Innovation - Proceedings", B. Kopacek (Hrg.); SAT, (2014), 1 S.

To top